Finding The Best Ir Remote Extender 2018 Ultimate Buying Guide and Reviews

Warranty & support bafx products offers a 1 year warranty against manufacturing defects with a simple & super easy claims process. Compact a smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller ir receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling. Now compatible with all ir controlled devices with better performance, no lag & better ease of use. Now also compatible with marantz devices. Compatible with all brands of components such as: uverse, att, cisco, scientific atlanta, yamaha, sony, logitech, verizon, lg, apple & more.

Put the cable box, dvd player & roku in a closet hidden from view, close the door and still be able to use the remote control. Control with the provided components you can control up to 8 infrared devices (expandable to 12 devices) from one location with the included ir receiver (expandable to 3 receivers). Extra receivers and transmitters may be purchased separately.

23 years experience manufacturing and supplying the cable and hotel industry. Works with verizon fios, comcast, scientific atlanta explorer, cisco, pace, motorola, arris, and dta set top boxes. Will not work with sa 4000hdc series.4200/hdc.4240.4250/hdc.8300/hd.8240/8260hdc box, a/v receivers, or ir repeater kits. Look at side pictures to compare size of competitors. Perfect size to blend into current flat screen frames. Hide your cable box in a cabinet, down in the basement or a/v rack or room using this small (.53 wide x 1.12 long x .43i tall )ir receiver with 9 ft lead to 3.5mm gold stereo plug.

Replaces cisco/scientific atlanta ir extender 1004648.4029013.4022323.

Control your home theater video sources like blu-ray players, dvd players, tivo, video receivers, and anything else that uses a standard ir remote control through walls and other obstructions by extending the ir signal wirelessly with this kit. Control certain devices only from specific areas in your setup. Use any number of transmitters or receivers on any given channel. Incompatibility list: cisco explorer 9865.8742.8640.4640, spectrum 8640, smth3272, samsung 101-t, smt-c5320, arris vms1100, ipc1100. 10-channel system that gives you the ability to interact with your devices without needing to worry about your wireless extenders interfereing with one another.

High sensitivity: remote control signal receiving real-time response to fast forward without delay. Control audio video components in entertainment cabinets or equipment closets using existing ir remote controls. Allows ir signals to pass through solid doors or walls, line-of-sight to the components is not required confirmation led built-in to the ir receiver acknowledges receipt of ir commands. 5v usb power supply(adapter not included). Easy setup: this ir repeater system is easy to use and sets up in minutes.

Kit includes: 1-distribution unit; 1-ir receiver (5′ cable); 1-12v dc power plug; 1-usb cable; 4-dual ir emitters (10′ cable) for 8 devices and a user manual. Powerful dual band ir receiver handles signals from 38-56 khz which covers nearly all a/v devices. Does not work with: cisco rng150 & rng250 & marantz devices. Tested to work with xbox one, roku, apple tv, nvidia shield and nvidia shield pro, kodi and other streamers as well as most a/v devices. No delay by overseas accent or personnel. Either the 12v adapter or the usb cable (not included) can be used to power the unit.

Ir remote control cable extends the signal to a video source like a blu-ray player so it can be controlled from your hdtv; red led in ir receiver bulb verifies the signal transmission. Home theater accessory repeats the ir signal to a dvd player, stb box, receiver or other a/v source with an infrared sensor; route the cable out of sight with a wall mounted hdtv; install the ir transmitter end in a concealed equipment closet to hide a catv box and control it remotely. Usb powered ir extension cable has an integrated 6 foot y-cable to receive 5v usb power; connect to an hdtv usb port or to a usb wall charger. Universal compatibility with most a/v equipment with infrared sensors (not rf); 30 degree ir receiver angle provides plenty of leeway to get the right angle with your remote.

Simple installation of this lightweight ir cable; locate the ir blaster near the source sensor to repeat the signal to the source; place the ir receiver in a convenient location with line of sight of your hand-held remote; ir tx and rx cables have adhesive circles on the back for mounting.

Works with verizon fios cable boxes model qip, chs, ipc, vms series except qip6xxx and qip2500, also works with dta271, dta50 etc. Will not work with a/v receivers or ir repeater kits. They require 12v receiver ours is only 5v. 38-56khz external ir receiver for arris, pace, bell, rogers, cisco, scientific atlanta etc. Look at side pictures to compare size of competitors. Perfect size to blend into current flat screen frames. Hide your cable box in a cabinet, down in the basement or a/v rack or room using this small (.53 wide x 1.12 long x .43in tall )ir receiver with 9 ft lead to 3.5mm gold stereo plug.

Listed on amazon since 2009 with 23 years expierence manufacturing and supplying the cable and hotel industry. Plugs directly into the rear ir in port. Unplug the power from the cable box then plug the ir receiver into the ir in port.

5v usb ac power supply, support amplifier, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player or any other components which is controlled by ir signal(pls note: not compatiable with apple tv, please stick the ir emitters on the ir interface of devices you want to control remotely. Receiver: with a convenient ir confirmation led and pick up the signal from the remote controller. Hidden ir repeater 1 receiver 4 emitters infrared remote control kit, you can control your home theater device/components which are kept behind closet doors or in a closed cabinet by this ir repeater system kit.

Emitter: send the signal to the a/v components.

Ir repeater kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. Ir remote control repeater ( transceiver) is a product which amplifies the ir signal of your appliances, you may be able to conceal your appliances such as in your tv console or cabinet. Note: plasma displays emit ir frequencies during use and may cause interference. It is advised to distance the it receiver from any plasma tv or display ability to control multiple appliances at various locations up to 10 m connect ir receiver to any of the 3.5 mm ports on the ir transceiver, if 2 or more ir receiver are connected, the distance between 2 ir receiver should not be less than 6 m to avoid interference. High sensitivity, real time transmission without any delay with its high sensitivity sensor. Remote indication lights on ir receiver: green being power connected while flashing red indicates the signal is being sent. Cfl friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.

Ir repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with ir infrared remote control extender repeater system. This product allows you to control a/v equipment with your existing ir remote controller, such as: amplifier, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player, etc. Infrared repeater kit controls your ir remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices – expandable to 12 devices.

Ir remote control cable extends the signal to a video source like a blu-ray player, dvd player, stb box, av receiver or other a/v source with an infrared sensor so it can be controlled from your hdtv. Usb powered ir extension cable has an integrated 6 foot y-cable to receive 5v usb power; connect to an hdtv usb port or to a usb wall charger power supply (sold separately). Compatible with most a/v equipment with infrared sensors (not rf). Place the ir emitter blaster near the source sensor to repeat the signal to the source; place the ir receiver in a convenient location with line of sight of your hand-held remote; ir tx and rx cables have adhesive circles on the back for mounting.

Simple installation ir repeater cable allows you to control home theater components located behind closet cabinet doors.