What's the Best New Ssb Cb Radio – Buyer’s Guide 2018

Mic and rf gain controls, automatic swr reading zero in “beep” function, automatic squelch control. Has scan, selectable 3 color large lcd display, dual watch function, & vox ability. Features swichable talkback, roger beep, varible rf power control, noise blanker & anl. Hi tech am/ssb cb radio with weatherbands and alert. Din size, operates from 12 to 24vdc, includes mic, mounting bracket and power cord.

The ft-857 provides up to 200 main memory channels, each of which may be named with an alpha-numeric label of up to eight characters. These 200 memories may be separated into as many as 10 memory groups of 20 memories each. For added convenience, you also get a quick memory and a home channel on each band, plus ten pairs of band-limit memories, to let you restrict operation to a sub-band, if you like. For superior interference rejection and transmitter talk power, the ft-857 s optional dsp circuitry enhances both sides of the communications circuit. The ft-857 s dsp unit features a 24-bit high-tech d/a chip for signal processing. Included are bandpass filter, auto-notch, and noise reduction filters, along with a microphone equalizer.

Ease of operation of the ft-857 is enhanced by the large-diameter (1.7 ) main tuning dial, similar in size to the tuning knob of many base station rigs. Selectable tuning steps of 2 khz/4 khz per revolution allow easy navigation around your favorite bands, while important keys and switches are strategically placed around the front panel for quick access. Providing transmitter coverage of the hf.50 mhz.144 mhz, and 430 mhz amateur bands, the ft-857 also includes receive coverage on 100 khz to 56 mhz.76 to 108 mhz.118-164 mhz, and 420-470 mhz. Enjoy the excitement of public safety monitoring, along with weather broadcasts, am and fm broadcasts, aviation communications, as well as the action on the ham bands. Utilizing an up-conversion architecture for hf with a first if of 68.33 mhz, the ft-857 features a double-conversion superheterodyne system (triple conversion on fm), with the 2nd if at 10.7 mhz. Extensive bandpass filtering in the front end, along with careful device selection and gain distribution, yield a receiver system ready for the strong-signal challenges of today s crowded bands.

Rf power: 1 to 100 watts ssb and cw.30w on psk. Latching relays for ultra low power consumption. Cat thru port for computer control of radio. 2000 memories sorted by frequency. 1.8 to 54 mhz coverage (continuous coverage for mars) tunes 4 to 1000 ohms. (16 to 150 on 6m) so-239 in and out connections for dipoles, verticals, beams, g5rv, ocf, cobra, ect. Dimensions: 7.0 l.7.8 w.2.0 h. Weight: 2 pounds includes 1.5 foot cat/power interface cable. Built-in cat/power interface for ft-450(d), ft-950, ftdx-1200, ftdx-3000 radios. Also interfaces with ft-2000 (non-d) with external dc power supply.

Built-in electronic keyer – cw message memory with beacon mode – cw pitch, /, sidetone control – automatic repeater shift – usb connector (cat control, audio interface, ptt/shift control) – two antenna connectors (hf/50mhz.144/430mhz). 3.5 inch tft full-color touch panel operation for superior operability and visibility – advanced functions such as high-quality audio transmission, ams, and group monitor utilizing c4fm digital, – triple conversion circuit (ssb/cw/am) /double conversion (fm/c4fm) configuration.1st if is set at 69.450 mhz – roofing filters 3 khz and 15 khz as standard equipment. Dynamic real-time spectrum scope, new. – multi-color waterfall display, new. – 160 meters through 70 centimeters – ssb/cw/fm/c4fm digital/am – 100 watts (2 meter / 70 centimeter: 50 watts) of solid output power performance.

If width and if shift providing great qrm rejection – contour, dnr, if notch and apf (audio peak filter, cw only) – 160 – 6 meters high speed automatic antenna tuner included – high accuracy tcxo 0.5 ppm. Optional fc-40 automatic antenna tuner (for long wire antenna) is connectable – optional atas-120a active tuning antenna is connectable, data fr mode (high speed data communication mode) is not supported, and transmission and reception of image data by c4fm digital is not possible.

The tuners enter a “sleep” mode when idle and when no transmit signal is present, turning off the microprocessor clock to avoid the generation of spurious signals. The target swr can be set at 1.5 or 2.0. All mfj intellituners learn and remember. When you transmit, they automatically adjust for minimum swr and remember the frequency and tuner settings, safely stored in non-volatile memory. The next time you operate on that frequency (or close to it), these tuner settings are instantly restored and you’re ready to operate in milliseconds. The tuner can learn and remember more than a thousand frequencies and tuner settings.

The tuner includes a highly efficient switching l-network with wide matching capability.1.8 to 30 mhz coverage. 192 values of capacitance and 192 values of inductance are available.