My Best Vesa Monitor Adapter Reviews & 2018 Buyer's Guide

, please note, this adapter will not work with monitors that have the power and video ports located near the center, as the ports would be covered and blocked from use. Easy assembly includes a variety of all hardware and screws to secure your vesa-less monitor. Adapter mounting kit fits practically any lcd or led monitor 20″ to 30″ with a bezel height from 11.5″ to 19.2″ and overall thickness from 1″ to 2.75″ (not recommended for slim monitors). Compatible with vesa pattern mounts (75 x 75 and 100 x 100 mounting holes). Sleek design matches almost any bezel and comes in a black matte finish.

Rather than having them hang out the back of the monitor, just slip them right through the slot and run them back along your mounting arm. Satisfaction guaranteed – if you have any problems with your mount, send it right back to USA – no questions asked. Fits dell s-series monitors: this bracket is only tested and guaranteed to work with: dell s2340l, s2340m, s2240l, and s2240m – new version, tighter fit, less flex, and pre-installed hardware. (will not work with other brands or models. ) see out other amazon listing for the other models in the s-series. Easy installation – you ll be able to install this bracket in less than two minutes with nothing more than a screwdriver. Just remove the existing base and snap ours in place instead – then connect it right to the vesa mount.

Attachment process – includes a separate vesa plate that is attached to the back of your screen, then slides on and clips into a second bracket piece that is mounted to your monitor or tv mount. Included hardware – includes all required screws and hardware (except for wall mounting hardware) for assembly. Compatibility – tested to support up to 22 lbs and fits vesa 75mm x 75mm & 100mm x 100mm mounting holes. Vesa plate kit – removable vesa plate kit designed to simplify your monitor or tv mounting process. Motion – once clipped in, your monitor is held secure and can be tilted and rotated.

Heavy-duty – powder coated steel design is heavy duty and can carry up to 17.6 lbs monitors. Compatibility – fits screen thickness of 1 inch to 2.75 inches. Fits bezel height from 10.5″ to 16.25″. Arms can be rotated up and down to adapt to different monitor sizes. Easy installation – includes all required screws and other hardware for easy assembly. Universal fit – designed for dell, samsung, hp, acer, asus, aoc, viewsonic monitors that do not have a standard bolt hole pattern. Adjustable security arms can be placed in many positions to accommodate varying sizes and shapes of monitors. Vesa mount adapter if you want to enjoy the benefits of using a monitor wall or desk mount, but your monitor does not have vesa holes in the back, you need this adaptor kit. The adjustable adapter arms hold your monitor in place and connect to a vesa bracket in the back.

Easy installation – includes all required screws and other hardware for easy assembly. Heavy-duty – powder coated steel design is heavy duty and can carry up to 17.6 lbs monitors. Compatibility – fits screen thickness of 1 inch to 2.75 inches. Fits bezel height from 10.5″ to 16.25″. Arms can be rotated up and down to adapt to different monitor sizes. Universal fit designed for dell, samsung, hp, acer, asus, aoc, viewsonic monitors that do not have a standard bolt hole pattern. Adjustable security arms can be placed in many positions to accommodate varying sizes and shapes of monitors. Vesa mount adaptor adapter arms that allow mounting non-vesa monitors to vesa monitor mount desk and wall mounts. Designed fit any vesa monitor mount with 75×75 and 100x100mm mounting holes, and includes all required screws and other hardware for assembly.

Easy assembly: includes all required screws and other hardware for easy assembly. Wide compatibility: designed to fit any vesa monitor mount with 75 x 75 and 100 x 100mm mounting holes. Supports most 13-inch to 27-inch monitors with thicknesses from 1″ to 1.5″ and weighing up to 17.6 lbs (8 kgs), please check your monitor dimension especially the depth before purchase. Fully adjustable: security arms can be placed in different positions to hold up to 27″-monitors securely in whatever configuration you require. Compact design: lightweight design at just 1.5 pounds.

Satisfaction guaranteed – if you have any problems with your mount, send it right back to USA – no questions asked. Fits acer monitors: this bracket is tested and guaranteed to work with: acer h226hql, h236hl, and h276hl. Remove the entire monitor base and snap this model directly into the monitor. Easy installation – you’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver. Just remove the existing base and snap ours in place instead – then connect it right to the vesa mount. Rather than having them hang out the back of the monitor, just slip them right through the slot and run them back along your mounting arm.

Mount your acer monitor on a standard vesa mount – remove the entire stand and snap this custom bracket right into your monitor. Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too.

Rather than having them hang out the back of the monitor, just slip them right through the slot and run them back along your mounting arm. Stronger than any competitor: humancentric uses a thicker sheet of steel than any competitor. For maximum stability, there isn’t a better option on the market. Satisfaction guaranteed: if you have any problems with your mount, send it right back to USA – no questions asked. Easy installation: you’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver. Fits acer monitors: this bracket is tested and guaranteed to work with: acer g226hql, g246hyl, g247hl, g277hl, h236hl, s200hql, s220hql, s230hl, s232hl, s240hl, s242hl. This bracket provides a “platform” to mount the neck of your monitor. For other models, humancentric provides custom brackets that clip directly into the monitor itself.

Package includes: 2 x wali vesa adaptor bracket (black).1 x mounting hardware kit.1 x user manual.10 year protection. Model compatibility: this bracket exclusively works the following model numbers: hp pavilion 22cw.22cwa.22xw.23cw.23xw.24cw.24xw.25cw.25xw.27cw.27xw. Check model number before ordering. More standardized choices: don t worry if your aoc monitors don t have mounting holes on the back. No matter you want to do a wall mount or a desk mount, this bracket makes them connect perfectly. Quick installation: install within minutes.

Fits asus monitors: this bracket is only tested and guaranteed to work with: asus mx239h, mx259h, mx279h, mx25aq, mx27aq, and mx299q (will not work with other brands or models and does not fit the vx series) important note: please view all the product images. This adapter will cause your monitor to move approximately 6″ closer to you than a standard vesa-compatible monitor. Satisfaction guaranteed – if you have any problems with your mount, send it right back to USA – no questions asked. Rather than having them hang out the back of the monitor, just slip them right through the slot and run them back along your mounting arm.

Whether you re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too. Easy installation – you ll be able to install this bracket in less than two minutes with nothing more than a screwdriver. Just remove the existing base and snap ours in place instead – then connect it right to the vesa mount.